The agricultural sector is characterized by its innovative capacity. Companies in this sector develop solutions, which are adapted to the demands of their customers and the requirements of the market. The corresponding products often have to fulfil the increasingly strict environmental requirements and laws that are applicable to the sector. In the agricultural sector, the functionality and quality of the products are more important than the final design. Technologies such as metal spinning, flange rolling and welding are frequently used for serving this sector as a contract supplier. Customers of Orfa Visser in the agricultural sector are for instance companies that produce: agricultural tools, milking installations, feeding troughs, fertiliser spreaders, ridge formers, storage facilities, air humidifier, cauliflower harvesters, mowing machines, fruit processing machines and harvesting machines, e.g. potato harvesters.
Orfa Visser has more than 40 years of experience in handling the requirements for the aviation sector, including the application the strictest quality standards and procedures. Safety and reliability are the very first concern. Our experience in the aviation has made it possible for us to develop a specific expertise with aluminium, Inconel and titanium. All materials must continuously perform under the most extreme circumstances. Aluminium has been used for many years in the aviation industry. In order to reduce the mass, to be lifted from the ground, one continuously searches for possibilities to apply lighter constructions within the airplane. On the one hand this means research for new and stronger alloys and, on the other hand, constructive adaptations. Here one can think of the development of seat frames, trolleys and working plates in the pantry, which all are now made of aluminium. The Inconel alloy is designed to resist high temperatures and to prevent corrosion, for example in gas turbines. Inconel is also frequently used for exhaust components in aeroplanes. Titanium alloys are frequently used because this metal is strong, light and highly corrosion-resistant. It is also highly resistant to extreme temperature fluctuations, which is why it is used
Orfa Visser is a reliable partner for suppliers of medical equipment. We deliver semi-finished components of a very high quality. This sector is characterized by its high-speed, the introduction of many innovative and the continuous development of new products. In the medical sector one can also speak of a high level of legislative and regulatory control. We work together with leading companies in the medical sector, to which we usually deliver seamless products. With the help of state-of-the-art CNC machines, we produce high-quality components and parts in stainless steel and other, more exotic, materials, which fulfil the strictest specifications and tolerances. Customers of Orfa Visser in the medical technology sector are for instance companies that produce: x-ray equipment, mechanical components, mechatronic systems, surgeons chairs, analysis equipment, operation tables, operation chairs, operation lamps, endoscope disinfectors, image intensifiers, medical instruments, high-quality components, machine frames and complete modules for the medical industry.
High demands are often made on the visual characteristics of the products in the lighting industry. These products are often produced in series. Metal spinning and deep drawing technologies are both highly suitable for this sector, due to the possibility of producing completely automatically at Orfa Visser, including automated infeed and output. This results in a constant quality and uniform products. Customers of Orfa Visser in the lighting industry are for instance companies that produce: designer lamps, garden lighting, office and project lighting, lighting armatures, illuminated advertising, voltage rail systems, lighting and light sources for swimming pools, sports accommodations, and public buildings, utilities, industry, roads and premises, accommodations, including reflectors and lighting installations for retail shops.
The construction sector is characterized by a great diversity of companies. It is a sector that is continuously in movement and never stands still. The construction industry is a sector that is very sensitive to economic fluctuations. When the economy expands the demand for larger and new buildings rises, and the opposite takes place when the economy shrinks. The construction industry often demands serial production. Technologies such as metal spinning, flanging and welding are frequently used to serve this sector as a contract supplier. Customers of Orfa Visser in the construction are for instance companies that produce: floor finishing machines, construction materials, rotating and sliding gates, equipment for dust control, concrete mixing plants, parking device, tooling for the concrete indusry, truck mixers, fall protecting for the construction industry and installation companies, concrete blocks, fire hose reels, concrete mixtures, products for utility construction works, concrete silos, storage tanks and silo installations.
The automotive industry, demands very high quality and precision of parts and assemblies. As a contract supplier, Orfa Visser has been granted A status by one of the largest companies in the automotive industry. This company evaluates its contract suppliers every month on a number of criteria. For an A status supplier this means e.g. that you’re not allowed to produce more than 50 quality deviations on 1 million products. Orfa Visser is unbelievably proud of its A status, because with this achievement we can really state that this particular customer has very high demands and uses exceedingly high standards. The fact that Orfa Visser has been given this status is a recognition of our entrepreneurial philosophy, namely to carry out your orders, as an outsourcer, quickly and in a quality-oriented way. Our technical experts prove that they are able to deliver a high quality service and maintain that same level as well. Customers of Orfa Visser in the automotive are for instance companies that produce: freight lorries, company cars, bulk carriers, semi-trailer bulk dumpers, bulk containers, semi-trailer tanks, tank superstructures, motorbicycle components, spoke wheels, petrol lorries, semi-trailer dumpers, bus wheels, exhaust, tank lorries, automotive air conditioning and motor cooling
In the area of filtration technology, companies frequently use the latest technologies and innovative designs. Besides forming standard plates, Orfa Visser also has the possibility of drawing flanges on perforated plates with a blind edge. Orfa Visser is a supplier that likes to think along with you at an early stage, to investigate the possibilities of the processing technologies that we offer. Metal spinning, deep drawing and flange rolling technologies are exceedingly suitable for making products for this sector. The great advantage of the application of these technologies is the lack of (welded)seems in our products. Customers of Orfa Visser in the filtration technology are for instance companies that produce: separators, filters, industrial coffee filters, vibrating sieves for cyclones, filtration equipment, wastewater cleaning equipment, boiler water treatment facilities, fluid and sediment filtration systems, sieve boxes, wells with sieves, drum sieves, sieve containers, water treatment systems for swimming pools, vacuum compression and filtration technology, pumps and equipment for the control of surface- and wastewater.
The machine building industry or mechanical engineering industry is a part of the industry that is active in the production and maintenance of both consumer and industrial equipment. Machine manufacturers produce a large variety of machines and machine components. In the machine industry, an incredibly extensive range of tools, machines, household equipment, installations and similar items is produced. The production for the purpose of the machine industry is highly varied, and ranges from piecework and series production to even mass production. Customers of Orfa Visser in the machinery are for instance companies that produce: mechatronic systems, dewatering drums, sludge drying systems, bowls, separators, dust reduce machines, packaging machines, counting machines, valves, street cleaning machines, industrial cleaning machines, textile machines, rotary offset presses, woodworking machines, centrifuge drums, industrial washing- and drying installations, musical kettle drums and pelleting machines.
In the furniture industry, more than half of the companies is active in interior decoration. Within the furniture sector one speaks of a tendency towards specialization, that is why companies consciously opt for contracting out semi-finished products to specialised manufacturers. The furniture industry is highly sensitive to trends. Production is increasingly customer-oriented, and the focus is very much on comfort and design. Orfa Visser is a supplier that likes to think along with you at an early stage, to investigate the possibilities in processing technologies that we offer. Customers of Orfa Visser in the furniture industry are for instance companies that produce: office furniture, designer furniture and canteen furniture.
Silo construction is a sector in which the designers of silos not only have to take into account the stored product and product characteristics; also the environmental factors of the exact location, such as wind load, the risk of earthquakes and local regulations must be taken into account. All of these aspects are important in the selection of the type of construction, the material, the wall thickness, the dimensions and the type of segments. Builders of silos often manufacture the segments for the silos in their own production facilities. From there the segments are transported by freight lorry or sea container to the end customer. At the construction site, the flanges at the segments are built together, after which the inside of the silo is hermetically sealed off by welding the seams. Orfa Visser is a supplier that likes to think along with you at an early stage, to investigate the possibilities within the processing technologies that we offer. Customers of Orfa Visser in the silo construction are for instance companies that build: silos or tanks for the storage of drinking water, wastewater, salt, concrete, grain, corn, cattle fodder, oil, manure and chemicals, as well as the storage of starch,
Many different companies are active in the horticulture. Most of these companies have one thing in common, namely that they are confronted with new producers on the world market, many of whom produce in more favourable climatic circumstances. Competition has also increased in Europe, primarily due to the introduction of the euro, which has made the comparison of prices throughout Europe much easier. The sector attaches great importance to their self-resolving capacity. Orfa Visser gladly thinks along with you as a customer, for finding feasible production solutions. Technologies such as metal spinning, flanging and welding are frequently used to serve this sector as a contract supplier. Customers of Orfa Visser in the horticultural are for instance companies that produce: transport facilities, gardening accessories, transport trolleys, internal conveyor and delivery systems, harvesting trolleys, spraying machines and hot air generators.
Equipment manufacturing is a knowledge-intensive sector that is especially characterized by project-oriented works, which includes engineering, assembly and contract works as major operational processes. This industrial sector is traditionally seen as a part of heavy industry. Nowadays, many smaller companies coming from light to medium-heavy industry are also active in this sector. For many organisations in the sector, the focus lies on innovation and R&D. The development of advanced equipment is a result of this focus. Orfa Visser is a supplier that likes to think along with you at an early stage, to investigate the possibilities with regard to the processing technologies that we offer. Customers of Orfa Visser in the equipment manaufacture are for instance companies that manufacture: process equipment, industrial burners, accelerator systems, high voltage connectors, steam boilers, process boilers, air intake and exhaust systems for gas turbines, HVCD systems, centrifuge technology, flare installations, columns, heat and power co-generation installations, oil and water separators, sieving machines, beer systems, gas filters, oil filters, wastewater cleaning installations, waste incineration facilities, storage tanks and filling machines.
In order to remain distinctive in the field of bulk processing, companies all around the world are facing the challenge of always searching for new technologies, products and services. A continuous optimisation of their production processes, according to the newest quality standards and regulations, is highly important. Orfa Visser is a supplier that likes to think along with you at an early stage, to investigate the possibilities within the processing technologies that we offer. Customers of Orfa Visser in the bulk handling are for instance companies that produce: warehousing and transshipment equipment, dryers, pneumatic and vacuum transport facilities, spiral transport devices, as well as dosing, weighing and measuring equipment.
Climate technology is increasingly being viewed as a necessity in our “warming” climate, something that this sector is responding to in the areas of cooling, natural ventilation, heating, heat recuperation, filtration, exhaust facilities, humidification and de-humidification. Orfa Visser is a supplier that likes to think along with you at an early stage, to investigate the possibilities within the processing technologies that we offer. Customers of Orfa Visser in the climate technology are for instance companies that produce: heat exchangers for cooling, freezing and air-conditioning installations, evaporators, water cooling equipment, cooling towers, components for cooling equipment, air conditioning units and water pumps, components for cooling and heat pump cycles, humidifiers, dryer filters, oil separators, oil coolers, chillers, cooling units, vaporisers, air-conditioning systems for drying warehousing and storage locations for potatoes, onions, carrots, flower bulbs and wood, air coolers and air-cooled industrial condensers.
Builders of constructions and semi-finished products for the railway sector must prove their disposal of suitable technical personnel, including the necessary facilities and equipment, to manufacture products for the railway industry. In this connection, special requirements, regarding to specialised welding technology, must also be met. An external audit must demonstrate that the various qualifications are met and also that the required welding personnel is available. Customers of Orfa Visser in the railway technology are for instance companies that manufacture: buses, trains, high-speed trains and locomotives, including current collectors, platform devices, air conditioning and motor cooling systems for trains, railway technology, shunting technology and roof cooling systems for railway vehicles.
In the world of tank construction, service starts with an orientation phase and often goes beyond the final delivery, in the form of maintenance and service. Most tank builders are KIWA certified. KIWA is an internationally active quality organisation, which is continuously improving processes, products, employees and organisations. Orfa Visser is a supplier that likes to think along with you at an early stage, to investigate the possibilities within the processing technologies that we offer. Customers of Orfa Visser in the tank construction are for instance companies that construct: aboveground and underground storage tanks in metal, mixing tanks, catch basins, horizontal and vertical high- and low-pressure storage tanks, which are used for the storage of drinking water, nitrogen, oil, various types of grease and other liquids.
In the area of ventilation technology, Orfa Visser uses state-of-the-art technologies for the manufacture of high-quality products, with regard to both standard products and customised products to the requirements of our customers. The sector for ventilation technology is continuously innovating in the area of energy savings, noise reduction and sustainability. Many of our customers therefore already use EC motors with regulated RPM, which consume less energy and make less noise. Technologies such as metal spinning, flange rolling and welding are frequently used to serve this sector as a contract supplier. Customers of Orfa Visser in the ventilation technology are for instance companies that produce: radial ventilators, axial ventilators, air conditioning for ships, parking garages, residential construction, utility construction and industry, roof ventilators, industrial ventilators, filter cabinets, filtration installations, vacuum cleaner installations, industrial exhaust systems, dusts separators, exhaust installations, de-dusting installations, atomisation technology, blowers or cyclones.
The food industry is changing very quickly, due to an increasing strict legislation in the area of the preparation of foods. Orfa Visser is a supplier that likes to think along with you at an early stage, to investigate the possibilities within the processing technologies that we offer. Metal spinning, deep drawing and flange rolling technologies are exceedingly suitable for making products for this sector. The great advantage of the application of these technologies is the lack of (welded) seems in our products. Customers of Orfa Visser in the food industry are for instance companies that produce: poultry slaughtering installations, machines for bakeries, industrial coffeemakers, doughnut ball machines, furnace, BBQs, mixing machines, kneading machines, vegetable dryers, chocolate and dosing machines.
Please send us your message. We will contact you as soon as possible.